|
|
Grips
|
We have a liberal policy on grips returned to us because we know from experience that not all grips fit exactly the way we want them to on every gun. Can't find what you are looking for from our vast assortment of Hogue and Pachmayr grips ? Shoot us an e-mail and we will place it into the store's inventory.
|
Hogue Rubber Grip for Ruger Single Actions
$21.95
HGG83000
If you are a cowboy action shooter then you know how comfortable your gun feels when you switch to rubber grips. Available for most Ruger single actions. Retails for $28.95.
|
Hogue Monogrip for Revolvers, Ruger GP-100
$21.95
HGG80000
One piece rubber grip for the Ruger GP-100 revolver. Retails for $28.95. Will also fit Ruger Super Redhawk.
|
Hogue Monogrip for Revolvers, Ruger Super Redhawk
$21.95
HGG80000
One piece rubber grip for the Ruger Super Redhawk. Retails for $28.95. Will also fit the Ruger GP-100 revolver.
|
Hogue Monogrip for Revolvers, Ruger Redhawk .44
$21.95
HGG86000
One piece rubber grip for the Ruger Redhawk 44. Retails for $28.95.
|
Hogue Monogrip for Revolvers, Ruger Super Blackhawk ( Execept XR3)
$21.95
HGG84000
One piece rubber grip for the Ruger Super Blackhawk. Retails for $28.95. Will not fit Super Blackhawk XR3.
|
Hogue Monogrip for Revolvers, Ruger SP-101
$21.95
HGG81000
One piece rubber grip for the Ruger SP-101 revolver. Retails for $28.95.
|
Hogue Monogrip for Revolvers, Ruger Speed Six
$21.95
HGG88000
One piece rubber grip for the Ruger Speed Six revolver. Retails for $28.95.
|
Hogue Monogrip for Revolvers, Ruger Security Six/Service Six
$21.95
HGG87000
One piece rubber grip fits both the Ruger Security Six or the Ruger Service Six. Retails for $28.95.
|
Hogue Rubber Grip for Semi-Autos, Beretta 92/96
$21.95
HGG92010
These are synthetic rubber grip panels and not a finger groove grip. Will fit 92F, 92SB, 92FS, 96 and M-9. Retails for $24.95.
|
Hogue Monogrip for Revolvers, Colt King Cobra/Anaconda
$21.95
HGG47000
One piece rubber revolver grip for Colt V frame Anaconda and King Cobra slides on to the frame from the bottom. A special steel stirrup device with screw locks the grip to the bottom of the strap. This is common to all Hogue revolver grips. Retails for $28.95.
|
Hogue Monogrip for Revolvers, Colt Detective Special
$21.95
HGG48000
One piece rubber grip fits all Colt D frame revolvers including Detective Special, Police Positive, Cobra and Agent. Retails for $28.95.
|
Hogue Monogrip for Revolvers, Colt Python
$21.95
HGG46000
Hogue one piece rubber grip will fit Colt I frame revolvers including Python, pre-70 Official Police and Trooper Mark V and Mark III. Retails for $28.95.
|
Hogue Rubber Grip for Semi-Autos, Colt 1911 w/Finger Grooves
$21.95
HGG45000
Synthetic rubber grip with wrap around finger grooves for all Colt 1911-style pistols. Retails for $28.95.
|
Hogue Rubber Grip for Semi-Autos, Colt 1911 Panels
$21.95
HGG45090
Synthetic rubber grip panels - and not a finger groove grip - to fit all Colt 1911-style pistols. Retails for $28.95.
|
Hogue Rubber Grip for Semi-Autos, Colt 1911 Officer's Model
$21.95
HGG43000
Synthetic, one piece wraparound rubber grip for Colt 1911 Officer's model. Retails for $28.95.
|
Hogue Rubber Grip for Semi-Autos, Colt 1911 Checkered Diamond Panels
$21.95
HGG45011
Newly introduced grip from Hogue that features checkered panels with diamond shapes around the grip screws. Retails for $28.95. Fits all Colt 1911-style pistols.
|
Hogue Monogrip for Revolvers, S&W J Frame, Round Butt
$21.95
HGG60000
One piece rubber grip for S&W J frame revolver. This grip will fit 30,33,34,36,37,38,43,49,60 and 649. Retails for $28.95.
|
Hogue Monogrip for Revolvers, S&W J Frame, Round Butt, Bantom Grip
$21.95
HGG61000
This grip is styled like a "boot grip" and weighs 1.4 oz. Will fit all of the J frame guns listed in the J frame round butt grip. Retails for $28.95.
|
Hogue Monogrip for Revolvers, S&W K/L Frame, Square Butt
$21.95
HGG10000
One piece rubber grip for S&W K/L frame square butt revolvers. This grip will fit the folowing K frame revolvers with square butt: 14,15,16,17,18,23,48 and 57. This grip will fit the following L frame revolvers with square butt: all 581,586,68 and 686. Retails for $28.95. :
|
Hogue Monogrip for Revolvers, S&W K Frame, Round Butt
$21.95
HGG19000
Rubber grip that will fit the following S&W K frame round butt revolvers: 10,12,13,19,64,65,66 and 547. Retails for $28.95.
|
Hogue Monogrip for Revolvers, S&W N Frame, Round Butt
$21.95
HGG25000
Hogue rubber grip that will only fit the S&W N frame Model 625 revolver. Retails for $28.95.
|
Hogue Monogrip for Revolvers, S&W N Frame, Square Butt
$21.95
HGG29000
Hogue one piece rubber grip that will fit the following S&W N frame square butt revolvers: 25,27,28,29,57,58 and 629. Retails for $28.95.
|
Hogue Rubber Grip for Semi-Autos, S&W 3rd Generation Full Size .45/10mm
$21.95
HGG06010
Synthetic rubber wraparound grip that will fit the folowing S&W models: 4506,1006,1066,1046,1086,4546,4566 and 4586. Retails for $28.95.
|
Hogue Rubber Grip for Semi-Autos, S&W 3rd Generation Full Size 9mm/.40
$21.95
HGG40010
Hogue rubber wraparound grip that will fit the following S&W models: 5903,5904,5906,5944,5946,5943,4006,4096,410,411,910 and 915. Retails for $28.95.
|
Hogue Rubber Grip for Semi-Autos, S&W 3rd Generation Full Size 9mm
$21.95
HGG69000
Hogue rubber wraparound grip that will fit the following S&W models: 6904,6906, etc. with double stack magazine. Retails for $28.95.
|
Hogue Rubber Grip for Semi-Autos, S&W Compact 9mm
$21.95
HGG13010
Hogue rubber wraparound grip that will fit the following S&W Comapct models: 3913 and simlar models. Retails for $28.95.
|
Hogue Rubber Grip for Semi-Autos, S&W Compact .40/.45
$21.95
HGG16010
Hogue rubber wraparound grip that will fit the following S&W models: 4516,4016 and simialr compact models. Retails for $28.95.
|
Hogue Rubber Grip for Semi-Autos, Sig P220
$21.95
HGG20010/20000
Hogue synthetic rubber grip that is available either as individual panels or a one piece wraparound, finger groove grip for the Sig P220. Retails for $28.95.
|
Hogue Rubber Grip for Semi-Autos, Sig P226
$21.95
HGG26010/26000
Available as either grip panels or as a one piece wraparound finger groove grip for your P226. Retails for $28.95
|
Hogue Rubber Grip for Semi-Autos, Sig P228/229
$21.95
HGG28010/28000
Hogue rubber grip available as either grip panels or a one piece, wraparound finger groove grip for your Sig P 228 or 229. Retails for $28.95.
|
Hogue Rubber Grip for Semi-Autos, Sig P230/232
$21.95
HGG30000
Hogue synthetic rubber grip panels for the Sig P230 and P232 pistols. Retails for $28.95.
|
Hogue Rubber Grip for Semi-Autos, Sig P239
$21.95
HGG31000
Hogue synthetic rubber grip panels for the Sig P239. Retails for $28.95.
|
Hogue Monogrip for Revolvers, Taurus Medium/Large Frame
$21.95
HGG66000
One piece rubber grip that will fit the following medium/large frame Taurus revolvers: 65,66,80,82,83,84,96,669,689,etc. Retails for $28.95.
|
Hogue Monogrip for Revolvers, Taurus Small Frame
$21.95
HGG67000
Hogue one piece rubber grip that will fit the following small frame Taurus revolvers: 73,85 and 94. Retails for $28.95.
|
Hogue Rubber Grip for Semi-Autos, Taurus 92/99 and 100/101
$21.95
HGG99010
Hogue grip panels that will fit either the Taurus PT92/99 or the Taurus PT 100/101. Retails for $28.95.
|
Hogue Rubber Grips for Semi-Autos, Para Ordnance
$21.95
HGG14/23/12/11000
Hogue one piece wraparound, finger groove grips for the Para Ordnance P series pistols. Available for the P-10, P-12, P-13 and P-14. Retails for $28.95.
|
Pachmayr Compac Grip, Charter Arms, All Models
$29.95
PAC02523
Compac grips feature a covered backstrap. Compact in design that helps in revolver concealibility. Will fit all models of Charter Arms snub revolvers.
|
Pachmayr Compac Grip, Colt D Frame
$29.95
PAC002515
Will fit all Colt D frame revolvers including: Detective Special, Police Positive, Agent and Cobra.
|
Pachmayr Compac Grip, Rossi, All Small Frame Models
$29.95
PAC03147
Will fit all small frame models of Rossi revolvers in all calibers including the discontinued Rossi Model 971 .38/.357. (I know, I have it fitted to mine!)
|
Pachmayr Compac Grip, Ruger SP-101
$29.95
PAC03183
Will fit the Ruger SP-101 revolver.
|
Pachmayr Compac Grip, S&W J-Frame, Square Butt
$29.95
PAC03255
Will fit the following S&W J-frame square butt revolvers: 31,33,34,326,37,43,51,60 and 63.
|
Pachmayr Compac Grip, S&W J-Frame, Round Butt
$29.95
PAC03252
Will fit the following S&W J-frame round butt revolvers: 30,33,34,36,37,38,43,49,60 and 649.
|
Pachmayr Compac Grip, S&W K/L- Frame, Round Butt
$29.95
PAC03270
Will fit the following S&W K/L-frame round butt revolvers: 10,12,13,19,64,65,66,547,581,586,68 and 686.
|
Pachmayr Compac Grip, Taurus Small Frame
$29.95
PAC03396
Will fit Taurus small frame revolvers including: 73,85 and 94.
|
Pachmayr Compac Professional Grip, S&W K/L-Frame, Round Butt
$29.95
PAC03272
These are smaller versions of the Compac models that provide an even greater degree of concealability. The design has an open back strap and the overall shape has been downsized. This design makes it possible for shooters with small hands or a shorter finger to better reach the trigger and obtain the advantages of a reliable Pachmayr grip. Fits the following S&W round butt K/L frame revolvers: 10,12,13,19,64,65,66,547,581,586,68 and 686.
|
Pachmayr Compac Professional Grip, S&W J-Frame, Round Butt
$29.95
PAC03254
Will fit the following S&W J-frame round butt revolvers: 30,33,34,36,37,38,43,49,60 and 649.
|
Pachmayr Compac Professional Grip, Ruger Speed-Six
$29.95
PAC03167
Will fit the Ruger Speed-Six.
|
Pachmayr Gripper Grip, S&W K/L-Frame, Round Butt
$29.95
PAC03266
Pachmayr Gripper Grips for revolvers are made from a specially formulated rubber compound optimized for control and recoil absorption. The finger groove style is popular for combat shooting and hunting. A slight palm swell fills the hand but is not so large as to be uncomfortable. Gripper Grips are fully checkered for appearance as well as for control. Fits the following S&W K/L-frame round butt revolvers: 10,12,13,19,64,65,66,547,581,586,68 and 686.
|
Pachmayr Gripper Grip, Charter Arms, All Models
$29.95
PAC02521
Will fit all models of Charter Arms snub revolvers.
|
Pachmayr Gripper Grip, Colt I Frames
$29.95
PAC02528
Will fit the following models of Colt I frame revolvers: pre-70 Official Police and Trooper and all Python. Note: Will not fit Trooper Mark III.
|
Pachmayr Gripper Grip, Colt D Frame
$29.95
PAC02513
Will fit the following models of Colt D Frame revolvers: Detective Special, Police Positive, Cobra, Agent and Diamondback. Has finger grooves. Fits the above Colt revolvers using the short square butt "D".
|
Pachmayr Gripper Grip, Ruger Security and Service Six
$29.95
PAC03175
Will fit the Ruger Security-Six and the Service-Six revolvers with serial number prefix of "151" or higher.
|
Pachmayr Gripper Grip, Ruger Super Balckhawk (Except XR3)
$29.95
PAC05067
Will fit the Ruger Super Blackhawk with the exception of the XR3-series.
|
Pachmayr Gripper Grip, Ruger GP-100 and Super Redhawk
$29.95
PAC02929
Will fit the Ruger GP-100 revolvers and the Super Redhawk revolvers.
|
Pachmayr Gripper Grip, Ruger Redhawk 44
$29.95
PAC03142
Will fit the Ruger Redhawk .44 revolver.
|
Pachmayr Gripper Grip, S&W J-Frame, Square Butt
$29.95
PAC03250
Will fit the following models of S&W J-frame square butt revolvers: 31,33,34,326,37,43,51,60 and 63.
|
Pachmayr Gripper Grip, S&W J-Frame, Round Butt
$29.95
PAC03249
Will fit the following models of S&W J-frame round butt revolvers: 30,33,34,36,37,38,43,49,60 and 649.
|
Pachmayr Gripper Grip, S&W K-Frame, Square Butt
$29.95
PAC03264
Will fit the following models of S&W K-frame square butt revolvers: 14,15,16,17,18,23,48 and 57.
|
Pachmayr Gripper Grip, S&W N-Frame, Square Butt
$29.95
PAC03292
Will fit the following S&W N-frame revolvers with square butt configuration: 25,27,28,29,57,58,625 and 629.
|
Pachmayr Gripper Grip, Taurus Large Frame
$29.95
PAC03395
Will fit the following models of Taurus large frame revolvers: 65,66,80,82,83,84 and 96.
|
Pachmayr Gripper Professional Grip, Colt I Frame
$29.95
PAC02529
These are smaller versions of the Gripper models. The design has an open backstrap and the overall shape has been downsized. This design makes it possible for shooters with small hands or shorter fingers to better reach the trigger and obtain the advantages of a reliable combat-style Pachmayr grip. Will fit the following Colt I frame revolvers: pre-70 Official Police and Trooper and all models of Python. Note: Will not fit Trooper Mark III.
|
Pachmayr Gripper Professional Grip, S&W K/L-Frame, Round&Square Butt
$29.95
PAC03265
Will fit the following models of S&W K/L frame revolvers in both round and square but versions: 10,12,13,14,15,16,17,18,19,23,48,57,64,65,66,547,581,586,68 and 686.
|
Pachmayr Gripper Professional Grip, S&W N-Frame, Square Butt
$29.95
PAC03293
Will fit the following models of S&W N-frame square butt revolvers: 25,27,28,29,57,58 and 629.
|
Pachmayr Gripper Professional Grip, Taurus Large Frame
$29.95
PAC04506
Will fit the following models of Taurus large frame revolvers: 65,66,80,82,83,84 and 96.
|
Pachmayr Decelerator Grip, S&W K-Frame, Square Butt
$29.95
PAC05140
All guns recoil, and recoil affects your accuracy, control, and overall shooting enjoyment. For those shooters who want the most out of their shooting experience, Pachmayr offers the Decelerator Grips. After years of working with rubber formulations trying to develop the softest most recoil absorbing grip on the market Pachmayr has developed this breakthrough rubber material —50% softer than a regular grip. Will fit the folowing models of S&W K frame square butt revolvers: 14,15,16,17,18,23,48 and 57.
|
Pachmayr Decelerator Grip, Ruger Super Blackhawk (Except XR3)
$29.95
PAC05134
Will fit the Ruger Super Blackhawk except the XR3-series.
|
Pachmayr Decelerator Grip, Ruger Redhawk 44
$29.95
PAC05058
Will fit the Ruger Redhawk 44.
|
Pachmayr Decelerator Grip, S&W J-Frame, Round Butt
$29.95
PAC05136
Will fit the following models of S&W J frame round butt revolvers: 30,33,34,36,37,38,43,49,60 and 649.
|
Pachmayr Decelerator Grip, S&W K-Frame, Round Butt
$29.95
PAC05138
Will fit the following models of S&W K frame round butt revolvers: 10,12,13,19,64,65,66 and 547.
|
Pachmayr Decelerator Grip, S&W N-Frame, Square Butt
$29.95
PAC05056
Will fit the following models of S&W N frame square butt revolvers: 25,27,28,29,57,58 and 629.
|
Pachmayr Decelerator Grip, Taurus Large Frame
$29.95
PAC05142
Will fit the following models of Taurus large frame revolvers: 65,66,80,82,83,84 and 96.
|
Pachmayr Presentation Grip, Colt J Frame
$27.95
PAC02538
The first grip design developed by Frank Pachmayr. This popular grip has been the mainstay of Pachmayr's line since the beginning and it remains popular. Pachmayr Presentation Grips feature a patented design, classic styling, and a magnificent finish with deep checkering for control and a superb shiny finish. Will fit the following Colt J frame revolvers: Metro Lawman, Official Police and Tropper MKIII. Note: the Presentation grip is no longer available for the Python, even though the photo shows the Python.
|
Pachmayr Presentation Grip, Ruger Blackhawk,Super Single-Six and Old Army
$24.95
PAC03137
Will fit the Ruger Blackhawk, Super Single-Six and Old Army.
|
Pachmayr Presentation Grip, Ruger Super Blackhawk (Except XR3)
$24.95
PAC03163
Will fit the Ruger Super Blackhawk except the XR3-series.
|
Pachmayr Presentation Grip, Ruger Redhawk 44
$24.95
PAC03140
Will fit the Ruger Redhawk 44.
|
Pachmayr Presentation Grip, S&W K/L Frame, Round and Square Butt
$24.95
PAC03267
Will fit the following S&W K/L frame revolvers in round and square butt configuration: 10,12,13,14,15,16,17,18,19,
23,48,57,64,65,66,547,581,586,68 and 686.
|
Pachmayr Presentation Grip, S&W N Frame, Square Butt
$24.95
PAC03294
Will fit the following models of S&W N frame square butt revolvers: 25,27,28,29,57,58 and 629.
|
Pachmayr American Legend Grip, Taurus Large Frame
$39.95
PAC00418
Pachmayr’s American Legend Series™ offers you the best of both worlds, by combining the feel and appearance of wood with the performance, handling, and control of rubber.
The American Legend Series grips feature rich walnut, finished to an attractive varnish shine coupled with Pachmayr Decelerator® rubber for a soft controlled feel. This grip will fit Taurus large frame, square butt revolvers of the following models: 65,66,80,82,83,86 and 96. Note: this grip will not fit if the serial number of the gun has a letter prefix. Also: no backstarp to this grip.
|
Pachmayr Signature Grip, Finger Groove, No Backstrap, 1911
$23.95
PAC05008
Signature Grips without Backstraps. These models of Pachmayr’s Signature Grips also feature their patented full wrap-around design, are made from rubber specially formulated for use on semi-automatic pistols, but are supplied without backstraps so they can be used on pistols such as the Government .45 models that utilize grip safety mechanisms. Will fit Colt and 1911 clones. Also referred to as 1911 GM-G.
|
Pachmayr Signature Grip, Checkered with Thumb Swell, 1911
$23.95
PAC02919
Will fit Colt Series 70/80 and 1911 clones. Has a thumb swell. Also has a toe extension. This Pachmayr model is also referred to as the GM-45.
|
Pachmayr Signature Grip, Combat Checkered, 1911
$23.95
PAC02921
Will fit Colt Series 70/80 and 1911 clones. Does not have a toe extension but does have a thumb swell. This model is also referred to as the GM/45-C.
|
Pachmayr Signature Grip, Sculptured Thumb Reduction Combat, 1911
$23.95
PAC02922
Will fit Colt Series 70/80 and 1911 clones. Nicely checkered combat grip with no toe extension and no thumb swell. Our favorite of all of the above. This model is also referred to as the GM-45/CS.
|
Pachmayr Signature Grip, S&W Model 645
$24.95
PAC03308
These are "Signature" panels that do not have a front or backstrap. This grip fits S&W semi-auto .45ACP 8-shot double action pistols. Note: This grip/panels will not fit the model 745 single action pistol with its over sized safety.
|
Pachmayr Full Signature Grip, Backstrap, Ruger P-Series
$31.95
PAC03953
Full Signature Grips with Backstraps. Pachmayr’s Signature Grips feature their patented full wrap-around design and are made from rubber specially formulated for use on semi-automatic pistols. This rubber compound gives them a feel that is unmistakably Pachmayr. Built-in steel inserts ensure they maintain their shape. This model will fit Ruger P85, P89, P90 and P91.
|
Pachmayr Full Signature Grip, Backstrap, Ruger MKII
$31.95
PAC03007
This model will fit the Ruger MKII semi-automatic target pistol. Has a backstrap.
|
Pachmayr Full Signature Grip, Backstrap, Taurus, Decocker
$31.95
PAC05043
Will fit the following models of Taurus decocker pistols: PT-92AFD, PT-99AFD, PT-100 and PT-101.
|
Pachmayr Full Signature Grip, Backstrap, Beretta/Taurus 92
$31.95
PAC02489
Will fit the following Beretta and Taurus 92-series pistols that have the safety on the frame and magazine release near the bottom of the grip.
|
Pachmayr Full Signature Grip, Backstrap, Beretta 92FS/D/G
$31.95
PAC02460
Will fit the following Beretta pistols: 92FS/D/G.
|
Pachmayr Full Signature Grip, Backstrap, Taurus 92/99
$31.95
PAC03102
Will fit the Taurus PT-92AF and the Taurus PT-99AF. Full backstrap.
|
Pachmayr Full Signature Grip, Backstrap, Walther PPK/S and PP
$31.95
PAC03086
Will fit the Walther PPK/S and PP-series pistols. Full backstrap. Please Note: This grip will not fit the model PPK.
This grip will not fit the Smith&Wesson model PPK/S with a serial number of 1100BAB and higher.
|
Pachmayr Full Signature Grip, Backstrap, Beretta 84
$31.95
PAC02485
Will fit the Beretta Model 84 in .380 caliber.
|
Pachmayr Full Signature Grip, Backstrap, Beretta 92
$31.95
PAC02497
Signature combat style wrap around grip fits Beretta 92SB and 92F model semi-auto pistols with safety lever on the slide. Comes with full backstrap insert. Note: this grip does not fit 92/96 FS models.
|
Pachmayr Full Signature Grip, Backstrap, S&W 39-Series
$31.95
PAC03306
Will fit the following Smith&Wesson 39-series pistols: M39, M439, M639, M539 and M52.
|
Pachmayr Full Signature Grip, Backstrap, S&W 59-Series
$31.95
PAC03309
Signature combat style wrap around grip that will fit the Smith&Wesson first generation model 59-series pistols and second generation models 459,559 and 659 semi-auto pistols. With full backstrap.
|
Butler Creek Boot Grip for S&W, K/L Frame Round Butt Revolver
$21.95
BCG50514
Same great grip as the square butt version. Will fit the following S&W round butt revolvers: 10,12,13,19,64,65,66,586 and 686.
|
Butler Creek Boot Grip for Ruger SP-101
$21.95
BCG50515
The Ruger SP-101 is very concealable. This boot grip makes it more easy to carry the SP-101 without the gun "printing thru" any clothing. All Butler Creek grips were originally designed by custom handgun stockmaker Craig Spegel. They absorb recoil and they feel great in the hand despite their small size.
|
Butler Creek Custom Grip for Ruger Super Blackhawk
$24.95
BCG50501
The Ruger Super Blackhawk is a gun for shooters with big hands. When you see this grip you will feel like you have small hands. This grip will fill even the largest hands. Will fit the following Super Blackhawk models: KS47N, KS411N, S47N & S411N.
|
|